Pneumatic dry granulation（2）
Source： | Date: 2011-09-15 | Hits:
Keywords:
1. Introduction
Granulation is a common unit operation in the manufacture of solid dosage forms to improve the properties of powders. According to Kristensen and Schaefer, the purpose of wet or dry granulation in pharmaceutical dosage form manufacture is to:
1) Improve powder flow properties for dosage filling and compression processes.
2) Eliminate wet granulation-induced degradation and improve product stability.
3) Prevent segregation.
4) Reduce bulk volume thereby minimizing storage volume and improving transport efficiencies.
5) Reduce potential environmental and safety hazards using either high-shear mixing or fluid-bed processing. However, dry granulation has recently increased in popularity.
News
- 2019-06-15>P-MECH CHINA 2019 YIBU BOOTH NO: N3B10a
- 2019-04-15>YIBU将出席第57 CIPM Exhibition held in Changsha in Hunan province
- 2018-12-28>Actived carbon particle mesh belt dryer made for Ingrevity
- 2018-03-10>big spin flash dryer and spray dryer delivery to pakistan and Italy customer on time
- 2017-12-29>two sets high speed centrifugal spray dryers and three sets of drum dryre delivered to Indonesia
- 2017-08-24>one set of LPG-100 spray dryer is delivered to America
- 2017-08-24>Five layers mesh belt dryer is sucessfully delivered to Manila(Philippines)
- 2017-04-05>Exhibition interpack 2017 in Dusseldorf In Germany
- 2016-11-23>The 18th International Exhibition in Moscow
- 2016-10-14>THE 16TH AGROCHEMEX 2016 in shanghai
Products
-
FGBX series Sealed -Circuit Circulation Fluidizing Dryer -
HDT Series Post Hopper Mixer( Post Bin Blender) -
TCD Series Crossflow type Clean Drying Oven(External) -
RNG Waste Heat Recovery System
-
JQX series Movable Cleaning Pump Station -
WNG Sereis Hot Pump Dryer
-
PYG Series Pressure Spray Dryer With Top Air Outlet -
WYG Series Horizontal pressure spray dryer
